Forward Grips and Pistol Grips
FGG-S Tactical Folding Grip |
|
$ 41.25 USD
Discliamer
If you own a handgun with rails and you decide to mount the grip onto your handgun, your handgun will be classified as an Any Other Weapon (AOW). You must register your weapon with ATF. You can download ATF form 1 at www.atk.gov This grip is intended to be used on long weapons. When mounted on a glock or any other Polymer handgun, there is a risk that the grip will slide off during shooting - because of the flexibility of the handgun's rail, so please do not mount the grip on a handgun!. Developed by Fab Defense, this unique folding grip to enable the operator to switch between horizontal and vertical grip. Features: � Transforms a horizontal grip to a vertical grip for different shooting applications. � When in horizontal position - just push grip open and it locks in Vertical position. � When in vertical position - press button and fold back. � Natural "fighting stance" hold on your rifle. � Designed to mount on Picatinny or weaver rail. � Designed mount on most handguns (In this case - you must register handgun with ATF an Any Other Weapon) � Saftey extention to prevent slipping of hand when shooting with handgun. � Reinforced plastic composite. � Super light weight. � No gunsmithing is required. |
|
AG-44S Ergonomic Quick Release Foregrip |
|
$ 35.30 USD
Features:
• Easy to fit and secure - Quick Release button. • Fits hand guards equipped with a Weaver or Picatinny rail system. • Natural Fighting stance hold on your rifle - Slightly angeled to counter recolil. • Improved performance in reaction, on target time and muzzle control during rapid fire. • No gunsmithing is required. • Quick Release mechanism. • Moulded from reinforced plastic composite. • Super lightweight. |
|
MG20 AR15 / M4 / M16 Quic Release Front Grip Magazine Adapter |
|
$ 39.60 USD
This Revolutional Accessory enables you to carry a spare mag, ready to use, on your weapon.
The MG20 serves as a spare mag carrier, but also as a unique ergonomic fore grip Features: . Quick Release button - just slide the grip onto the rail. . Backup Locking Screw - Should you decide to lock it in place when not using the quick release mechanism. . Magazine release button - similar to the AR15/M16 one - to quickly release the magazine. . Can be used asan ergonomic foregrip even without the magazine inside |
|
GM-TVG1 Tactical Ergonomic Fore Grip |
|
$ 20.55 USD
Description:
Tactical Vertical Grip that mounts on any Picatinny / Weaver rail. � Non-slip Features. � Complete with Battery Compartment. � Pressure Switch Housing on both sides. � Mounts on any Picatinny / Weaver rail. |
|
FFA-T4 Flashligh Adapter with incorporated Grip |
|
$ 79.90 USD
Nothing simmilar exists!
This Adapter is made for the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight. The adapter will fit any long weapon with a picatinny / weaver rail. Features: � Fits the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight. � Quick flashlight detachment. � Transforms a horizontal grip to a vertical grip for different shooting applications. � When in horizontal position - just push grip open and it locks in Vertical position. � When in vertical position - press button and fold back. � Natural "fighting stance" hold on your rifle. � Designed to mount on Picatinny or weaver rail. |
|
T-Grip Tactical Foregrip with 1" Flashlight adapter and On/Off Trigger |
|
$ 79.20 USDThis unique tactical grip allows the operator to use his 1" Flashlight. |
|
MIKI The world's most Ergonomic Flashlight adapter |
|
$ 50.65 USD
The world's most ergonomically designed grip, featuring the most comfortable and natural "fighting stance".
. This unique grip permits several gripping positions, such as forearm, foregrip and many others. Most important is the way it fits perfectly in your hands. . Designed to hold any 1 1/8" diameter flashlight like the Streamlight Stinger and Inova T4. . Easy to fit on any firearm with a weaver or picatinnt rail. . The flashlight is secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargable flashlights. . No gunsmithing required. . Molded from reinforced polymer composite. . Super Lightweight. |
|
T-GripGL Green Laser & Tactical Foregrip with 1" Flashlight adapter and On/Off Trigger |
|
$ 189.10 USD
This unique tactical grip allows the operator to use his 1" Laser / Flashlight.
. Tactical green Laser included. . The most ergonomically designed vertical foregrip. . Has storage compartment for batteries, cleaning kit... . A 1" flashlight laser mount is incorporated along with an On/Off Trigger located on the grip itself. (No need for bulky and pricy pressure switches. . Fits any weapon with a weaver or picatinny rail. . Mounted using a quick release locking system with an additional locking screw as backup. . No gunsmithing required. . Molded from reinforced polymer composite. . Super lightweight. |
|
TAL-4 Tactical Vertical Grip |
|
$ 37.30 USD
The best and most affordable Tactical Vertical Grip out there.
Features: - No Slip Design - Double sided pressure pad housing - Internal water-proof battery compartment - Quick-release attachment mechanism - Additional locking screw option - Durable and lightweight polymer construction - Easy to mount, requires no gunsmithing - Available soon in OD Green and Desert Tan |
|
T-GripST Stryker Flashlight & Tactical Foregrip with 1" Flashlight adapter and On/Off Trigger |
|
$ 122.90 USDValuable comments from active commando soldiers have been put into the development of this tactial flashlight - including compact dimensions, built of 6061-T6 airplane aluminum, and black hard-anodized. The design of the bezel avoids rolling when providing continuus light. The tail cap has two functions to choose from - turn the tail cap for constant light or just press the button for momentary light. The xenon lamp assembly (80 lumens) makes a white beam of light possible, without the need to focus it, even in an extreme situation. This illumination tool is sealed with o-rings to avoid moisture and dust from damaging it. Also features a removable stainless steel pocket clip. Includes two 3 V Lithium batteries (CR123A), to take it suddenly into mission. Overall length 4 7/8". Weight 5.9 oz. |
|
MD-LF1 Tactical Light Foregrip 1" Diameter |
|
$ 58.60 USD
Integrated Vertical Foregrip for use with Tactical Lights. Designed to fit any Picatinny / Weaver Rail.
|
|
MD-FG1 Aluminum Tactical Foregrip with Storage Cavity |
|
$ 45.30 USD |
|
MD-FGR1 Tactical Foregrip with Side Rail for Flashlight / Laser |
|
$ 64.95 USD
The Ultimate Vertical Grip
|
|
T-POD Tactical Foregrip & Bipod |
|
$ 123.35 USD
The T-Pod, our newest vertical grip, is based on the design of our very popular TAL-4 product, the foregrip we developed a little over a year ago at the request of the Drug Enforcement Agency (DEA). However, the T-Pod also includes an incorporated fully adjustable bipod, offering even more functionality!
The T-POD is made in Israel by FAB Defense and features a lifetime warranty |
|
T-PODSL Vertical Foregrip & Bipod with Integral Tactical Light |
|
$ 218.60 USDThe T-PodSL combines all the exciting features of the T-POD, our newest vertical grip, and adds a powerful LED tactical light. It maintains the sleek low-drag design of the T-POD while allowing the operator to utilize up to 100 lumens of white light illumination from a single CR123A power source. The LED assembly means no broken bulbs and runs for over an hour on one battery. The light housing is manufactured from aerospace aluminum, hard anodized to military specifications.
The T-PODSL is made in Israel by FAB Defense and features a lifetime warranty. |
|
MD-BG Tactical Vertical Battle Grip |
|
$ 64.95 USD
Description:
6061 Aircraft Grade Aluminum. CNC Machined. Rail Grabber Mounts To Any Picatinny 1913 Or Weaver Rail. Type II Class 3 Hard Black Anodized. O-Ring Sealed Waterproof compartment. Non-Slip Mil-Spec Retention O-Rings. All Weather - No Heat Transfer. Self Locking Wing Nut Systems. Ultra Light Weight Only 5.8oz. Lifetime Warranty. 100% USA Made. |
|
T-GripR Tactical Foregrip with 1" Flashlight adapter w/ rear Activation |
|
$ 79.20 USD
This unique tactical grip allows the operator to use his 1" Flashlight.
. The most ergonomically designed vertical foregrip. . Has storage compartment for batteries, cleaning kit... . A 1" flashlight mount is incorporated along with an On/Off rear activation. (No need for bulky and pricy pressure switches. . Fits any weapon with a weaver or picatinny rail. . Mounted using a quick release locking system with an additional locking screw as backup. . No gunsmithing required. . Molded from reinforced polymer composite. . Super lightweight. |
|
MWG Magazine well grip for AR15/ M16 /M4 |
|
$ 22.65 USD
***** Some AR15s require slight modification to the MWG - some sanding / shaving of the inside lips of the MWG to make it fit *****
Description: Transform your existing magwell onto a fast action magwell and ergonomic grip. Mounts directly below the receivers front pivot pin and OVER the existing magazine well. Provides a large beveled opening for Super-Fast magazine changes. No Gunsmithing or modifications to the weapon needed. Easy installation � Simply tighten into place utilizing 3 set screws. Light weight - constructed of reinforced polymer composite. |
|
TFL Tactical Vertical Folding Grip w/ Storage Compartment |
|
$ 40.25 USD
Description:
Quickly transforms from a horizontal grip to a vertical grip. � Offers 7 different grip positions for various tactical shooting options. � Grip can be slipped-on or side-mounted on a Picatinny rail. � Large storage compartment. � State-of-the-art ergonomic design. � Heavy duty polymer construction. � Fits all standard Picatinny rails. � Available in the following camouflage colors: Black, Desert Tan, and Olive Drab Green. |
|
FFGS-1 Integrated Folding Foregirip and 1 Inch Flashlight Mount |
|
$ 79.90 USD
Description:
The grip transforms from vertical to horizontal with a push of a button, and allows you to choose your natural "fighting stance". � Designed to hold any 1" diameter flashlight and to allow quick and easy operation. � Simple rear thumb activation of the flashlight. � Fits easily on a firearm. � Secures to a Picatinny rail by two bolts. � Flashlight secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight. This is a real advantage for rechargeable flashlight. � No gunsmithing is required. � Molded from reinforced polymer composite. � Super lightweight. |
|
AG-43 M16/AR15 Ergonomic Pistol Grip |
|
$ 24.00 USD
This new TACTICAL PISTOL GRIP is sure to increase the performance of your rifle or carbine.
Made from reinforced plastic composite, it incorporates finger swelts and a backstrap that is designed with surfacing to enhance your grip and minimize the chance of slippage should the grip become wet. The integral extended beavertail provides better control during firing sequences as it allows a higher and firmer hold on your rifle. Also, the supplied insert securely seals the uniquely designed bottom of the Tactical Pistol Grip to allow a readily accessible storage area. The AG-43 Grip Carries our Lifetime Replacement Guarantee |
|
AGF-43S Ergonomic Folding Pistol Grip for AR15/M4/M16 |
|
$ 46.60 USD
This unique folding grip enables quick deployment from vehicles, easy storage and carrying in gun cases
and perfect for undercover work. Features: . Transforms a horizontal grip to a vertical grip . Perfect for undercover work . Weapon will fit easier in gun case and paratroopers weapon rack . Deploy faster from vehicles . Quick Fold/Unfold button . Made from reinforced plastic composite |
|
AG-47S Pistol Grip |
|
$ 29.35 USD
* Advances ergonomic design.
* Though design and material. * Built-in storage compartment. * Improve trigger operation |
|
AG-58 VZ-58 Pistol Grip |
|
$ 29.35 USD
Description:
Advanced ergonomic design. Tough design & material. Built-in storage compartment. Improves finger to trigger correspondence. Unique texture to prevent slipping |
|
WG1911 1911 grips with incorporated mag funnel |
|
$ 24.15 USD
Nothing like it out there!
Instead of buying a $100.00+ magazine extention and having to go to the gunsmith to install it by drilling into your 1911, here is the simplest most inexpensive solution: Just take off your existing grips and place these instead! |
|
