Flashlight and Laser Mounts
PLA1 1" Tactical Flashlight Mount - Quick Release |
|
![]() $ 27.05 USD
Features:
• Exceptional design detail. • 1� bore - fits most 1" flashlights (Surefire, Pelican, Beamshot....). • Fits all types of Picatinny rails. • Efficient and easy to fit. • Quick release mechanism. • Special angle-lip design for easy flashlight slide in. • Moulded from reinforced plastic composite. |
|
PLA3/4 3/4" Tactical Flashlight Mount - Quick Release |
|
![]() $ 23.95 USD
Features:
• Exceptional design detail. • 3/4� bore - fits most 3/4" lasers and flashlights • Fits all types of Picatinny rails. • Efficient and easy to fit. • Quick release mechanism. • Special angle-lip design for easy flashlight slide in. • Moulded from reinforced plastic composite. |
|
PLA1/18 1 1/8" Tactical Flashlight Mount - Quick Release |
|
![]() $ 28.50 USD
Features:
• Exceptional design detail. • 1 1/8� bore - fits the Streamlight Stinger and most 1 1/8" flashlights. • Fits all types of Picatinny rails. • Efficient and easy to fit. • Quick release mechanism. • Special angle-lip design for easy flashlight slide in. • Moulded from reinforced plastic composite. |
|
FFA-T4 Flashligh Adapter with incorporated Grip |
|
![]() $ 90.00 USD
Nothing simmilar exists!
This Adapter is made for the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight. The adapter will fit any long weapon with a picatinny / weaver rail. Features: � Fits the Streamlight Stinger, Inova T4 and any other 1 1/8" diameter flashlight. � Quick flashlight detachment. � Transforms a horizontal grip to a vertical grip for different shooting applications. � When in horizontal position - just push grip open and it locks in Vertical position. � When in vertical position - press button and fold back. � Natural "fighting stance" hold on your rifle. � Designed to mount on Picatinny or weaver rail. |
|
T-Grip Tactical Foregrip with 1" Flashlight adapter and On/Off Trigger |
|
![]() $ 88.65 USD
This unique tactical grip allows the operator to use his 1" Flashlight.
. The most ergonomically designed vertical foregrip. . Has storage compartment for batteries, cleaning kit... . A 1" flashlight mount is incorporated along with an On/Off Trigger located on the grip itself. (No need for bulky and pricy pressure switches. . Fits any weapon with a weaver or picatinny rail. . Mounted using a quick release locking system with an additional locking screw as backup. . No gunsmithing required. . Molded from reinforced polymer composite. . Super lightweight. |
|
MIKI The world's most Ergonomic Flashlight adapter |
|
![]() $ 57.05 USD
The world's most ergonomically designed grip, featuring the most comfortable and natural "fighting stance".
. This unique grip permits several gripping positions, such as forearm, foregrip and many others. Most important is the way it fits perfectly in your hands. . Designed to hold any 1 1/8" diameter flashlight like the Streamlight Stinger and Inova T4. . Easy to fit on any firearm with a weaver or picatinnt rail. . The flashlight is secured in the mount by a quick release locking system that allows quick mounting or removal of the flashlight, a real advantage for rechargable flashlights. . No gunsmithing required. . Molded from reinforced polymer composite. . Super Lightweight. |
|
T-GripGL Green Laser & Tactical Foregrip with 1" Flashlight adapter and On/Off Trigger |
|
![]() $ 213.05 USD
This unique tactical grip allows the operator to use his 1" Laser / Flashlight.
. Tactical green Laser included. . The most ergonomically designed vertical foregrip. . Has storage compartment for batteries, cleaning kit... . A 1" flashlight laser mount is incorporated along with an On/Off Trigger located on the grip itself. (No need for bulky and pricy pressure switches. . Fits any weapon with a weaver or picatinny rail. . Mounted using a quick release locking system with an additional locking screw as backup. . No gunsmithing required. . Molded from reinforced polymer composite. . Super lightweight. |
|
T-GripST Stryker Flashlight & Tactical Foregrip with 1" Flashlight adapter and On/Off Trigger |
|
![]() $ 133.75 USD
Valuable comments from active commando soldiers have been put into the development of this tactial flashlight - including compact dimensions, built of 6061-T6 airplane aluminum, and black hard-anodized. The design of the bezel avoids rolling when providing continuus light. The tail cap has two functions to choose from - turn the tail cap for constant light or just press the button for momentary light. The xenon lamp assembly (80 lumens) makes a white beam of light possible, without the need to focus it, even in an extreme situation. This illumination tool is sealed with o-rings to avoid moisture and dust from damaging it. Also features a removable stainless steel pocket clip. Includes two 3 V Lithium batteries (CR123A), to take it suddenly into mission. Overall length 4 7/8". Weight 5.9 oz.
|
|
PLS1 Tactical side mount for 1" diameter flashlights |
|
![]() $ 33.05 USD
mount for 1" diameter flashlights
|
|
MD-LF1 Tactical Light Foregrip 1" Diameter |
|
![]() $ 66.00 USD
Integrated Vertical Foregrip for use with Tactical Lights. Designed to fit any Picatinny / Weaver Rail.
|
|
MD-FC1 Flashlight Belt Clip |
|
![]() $ 12.00 USD
Made of spring steel, will accommodate all 1-Inch to 1 1/8-Inch Flashlights. Designed to work with all belts up to 1 3/4-Inch.
By expanding or compressing steel loop, you can draw flashlight with belt clip, or use it as a belt pouch. |
|
MD-FLA1 1" Diameter Flashlight ring Mount |
|
![]() $ 27.05 USD |
|
PLG Handgun Flashlight Mount |
|
![]() $ 33.05 USD
A smart new solution to mount a 1" flashlight to a handgun.
Quickly mounted with the tail-cap switch in an exact ergonomic position for easy and correct tactical operation. Features: * Fits perfectly on most handgun accessory rails. * Designed to hold all 1" flashlights. * Bolt locking system to secure the flashlight to the mount. * Newly designed quick release mechanism for fast addition or removal. * Tough rigid and lightweight reinforced polymer design. * Allows perfect access to the flashlight button. * Easy installation. |
|
MD-FSM Aluminum Side Mount for 1" diameter flashlights |
|
![]() $ 36.00 USD
The MD-FSM offset flashlight mount positions any light at the optimal position for tailcap activation with the offhand thumb.
Features include: |
|
1" Aluminum Flashlight Mount |
|
![]() $ 9.95 USDA 1" Aluminum flashlight mount to fit standard picatinny or weaver rails and mount flashlights such as the Surefire G2/G3 and 6P/9P.
*** The best price available for an aluminum flashlight mount! *** |
|
T-PODSL Vertical Foregrip & Bipod with Integral Tactical Light |
|
![]() $ 239.10 USDThe T-PodSL combines all the exciting features of the T-POD, our newest vertical grip, and adds a powerful LED tactical light. It maintains the sleek low-drag design of the T-POD while allowing the operator to utilize up to 100 lumens of white light illumination from a single CR123A power source. The LED assembly means no broken bulbs and runs for over an hour on one battery. The light housing is manufactured from aerospace aluminum, hard anodized to military specifications.
The T-PODSL is made in Israel by FAB Defense and features a lifetime |
|
T-GripR Tactical Foregrip with 1" Flashlight adapter w/ rear Activation |
|
![]() $ 88.65 USD
This unique tactical grip allows the operator to use his 1" Flashlight.
. The most ergonomically designed vertical foregrip. . Has storage compartment for batteries, cleaning kit... . A 1" flashlight mount is incorporated along with an On/Off rear activation. (No need for bulky and pricy pressure switches. . Fits any weapon with a weaver or picatinny rail. . Mounted using a quick release locking system with an additional locking screw as backup. . No gunsmithing required. . Molded from reinforced polymer composite. . Super lightweight. |
|